The short answer
Hedging means offsetting the price risk of a physical metal contract with an opposite contract, on the exchange or with an intermediary, or by aligning purchase and sales formulas. AI does not decide whether, when and how much to hedge and does not forecast prices: it reads the clauses, calculates net exposure from the ERP, checks invoices and settlements, warns of deadlines and prepares draft documents for the bank and the auditor.
- Hedging is the opposite of speculation: you also give up the gains in order to have a known cost. How much risk to keep is for the company to decide.
- The first hedge is physical: purchase and sales formulas with the same reference and the same period. Derivatives concern the mismatch that remains.
- Net exposure by period is calculated from the data in the ERP: orders, contracts, deliveries, stocks, existing hedges.
- Basis risk has three sources for those who work with metals in Italy: the premium, a reference other than the LME Official price, the euro-dollar exchange rate.
- AI reads, calculates, checks, alerts and prepares drafts; it does not recommend transactions, does not forecast prices and does not send orders without a person.
- EMIR and OIC 32, Italy's accounting standard on derivatives, require accurate data and documents written at the outset: it is record-keeping work, where software really helps.
Note. This guide is for information only: it describes processes, data and software tools; it is not financial, legal or accounting advice and it contains no forecasts or recommendations on hedging transactions. Whether, when and how much to hedge is decided by the company with its own bank or intermediary, with its accountant and its auditor. The national rules described are those of Italy; other EU member states have their own. Updated as of 13 October 2026.
The copper price changes between order and invoice
A metal processor receives a fixed-price order and accepts it; the metal needed to produce it will be bought weeks or months later, at a price that follows the market. If the metal rises in the meantime, the margin on the order shrinks or disappears. It works the other way round too: a company that holds stocks bought at one price sees their value fall if the market falls. The London Metal Exchange, the LME, describes price exposure in this way: the risk arises from the mismatch between the moment a price is fixed with the customer and the moment the metal is bought.
In Italy there are more than seventy thousand enterprises in basic metals and fabricated metal products (divisions C24 and C25), and 99.7% of them have fewer than 250 people employed (sum of the 2024 Eurostat data for the two divisions): almost all of them live with this mismatch. This guide explains what hedging is, which data it starts from and what artificial intelligence (AI) can do in the process: not whether, when and how much to hedge, which is a decision for the company with its intermediary.
What hedging means
Hedging (covering price risk) is, in the LME’s words, offsetting the risk of price movements in the physical market by fixing a price for the same commodity in the futures market; for Borsa Italiana, the Italian stock exchange, it is the operation of someone who wants to reduce or eliminate the risk of an open position. There are two ways:
- physical hedging, known as back-to-back: buying the metal with the same pricing formula used to sell the product, same reference and same quotation period. If the formulas match, the risk passes from one contract to the other without derivatives;
- financial hedging: a futures or forward contract, on the exchange or with a bank, that offsets the movement of the physical contract. A company that has to buy metal hedges against a rise (long hedge); one that holds stocks or sells at a floating price hedges against a fall (short hedge).
Hedging is the opposite of speculation: a company that hedges also gives up the gains that a favourable move would have brought, in order to have a known cost or revenue. And how much risk to keep is for the company to decide: it can eliminate it altogether, hedge part of it or bear it. The LME adds a rule that touches everything else in this guide: the hedging programme has to be built together with the purchasing or sales plan, and the reference price must be the Official Settlement price, so that the hedge matches the contract and the accounting standards.
Exposure: purchases, sales, stocks
Exposure is the part of the result that changes when the price changes. For a metal processor it arises from three things: purchases at a floating price, sales at a fixed price, and stocks. It changes every time an order, a delivery or an invoice comes in, and it is measured by period, in tonnes per metal: the net exposure for a month is the balance between the metal that gains and the metal that loses when the price rises.
A typical case. A component manufacturer sells at a fixed price for the quarter and buys copper at the LME monthly average of the delivery month: it is exposed to a rise on all the copper it has not yet bought. If instead it sells at the same average at which it buys, it has done a back-to-back hedge without knowing it: it remains exposed only on the premium and the exchange rate. Indexation clauses are the place where this exposure is created or cancelled out: that is why the inventory starts from the contracts.
Two exposures, not one: LME contracts are in dollars. A hedge on the metal price fixes the dollars per tonne, not the euros; exchange rate risk is hedged separately, with maturities aligned to the quotation periods.
The instruments, without giving advice
The market offers futures with daily, weekly and monthly maturities, the prompt dates, which make it possible to match the hedge to the day of physical delivery; options; monthly average contracts, because many commercial contracts use the average of the month’s Official prices; and tailor-made hedges with a bank or an exchange member, for quantities or periods that do not coincide with the standard lots. A company does not trade on the exchange directly: it does so through an LME member or a bank; with the bank, the contract is settled as the difference between the fixed price and the floating price; on the exchange, the position is closed by buying or selling back the contract before the prompt date.
Two process facts that weigh on the treasury. An exchange contract requires margins, initial and variation, calculated by the clearing house: the hedge ties up cash even when it works. And, in the LME’s words, financial hedging can generate cash outflows, so it has to be aligned with the company’s risk management strategy, with time horizons, hedge ratios and oversight set beforehand, and with sales, purchasing and whoever looks after risk and treasury, which in an SME is usually administration (accounts), working together.
Which instrument, when and for how much is decided with the intermediary: the guide stops here.
Basis risk: premium, reference, exchange rate
For the hedge really to offset the risk, the reference price of the physical contract and that of the hedge must be identical, or at least closely correlated. When they are not, the two prices move differently and the hedge offsets only in part: this is basis risk. For those who work with metals in Italy it has three sources:
- the metal premium, which is added to the exchange price for shape, delivery and location, and which the exchange contract does not cover;
- a different reference from the Official Cash Settlement: a Milan Index, a formula of one’s own, a single day instead of the average;
- the euro-dollar exchange rate, which is hedged separately.
The practical rule is that the physical contract and the hedge must “speak the same price”: same reference, same period, quantities consistent with the part being hedged. Keeping the physical contract separate from the hedge also has a commercial advantage that the LME describes: suppliers do not have to build into the price a cushion for the risk they would take on with a fixed price, and quotes become comparable.
Where AI helps, and where it does not
Seven process tasks, with the rule that holds in all the guides on this site about metals: the numbers are calculated by code; the model reads, explains and flags.
- It reads the clauses and builds the inventory of exposures. From contracts in PDF, in Italian and in English, it proposes the structured parameters: reference, period, premium, exchange rate, quantities, due dates. A person checks them; the result is the list of all the flows that depend on the metal. It is also useful for EMIR: to show that a derivative reduces the risks of the commercial activity, under the criteria of Delegated Regulation 149/2013, Article 10, it helps to have the list of the contracts it hedges.
- It calculates net exposure by period from the data in the ERP (the company’s management software), with deterministic formulas, and answers questions about the result: how much of next quarter’s copper is already hedged back-to-back, how much remains unhedged. It shows how much is hedged; it does not say how much should be.
- It checks that invoices and settlements use the same reference. The check on purchase invoices is already in the guide on LME prices in the ERP; here we add the mirror-image check: that the settlement of the hedge, the floating price paid to or received from the bank, uses the same reference and the same period as the physical contract.
- It gives alerts on deadlines and thresholds: prompt dates and the last day on which it is possible to trade, the quotation windows of the contracts, premiums about to expire, the annual calculation of EMIR positions. Alerts linked to the company’s contracts, with thresholds set by the company, never suggested by the system.
- It prepares draft documents for the bank or the LME member (accurate contract data, LEI code, evidence that the derivative hedges a commercial activity) and for the auditor (the designation documentation required by OIC 32, Italy’s accounting standard on derivatives, and the check at each closing of the critical terms: nominal amount, settlement dates, maturity, underlying). Drafts: the designation is decided and signed by whoever prepares the financial statements.
- It runs sensitivity analyses, not forecasts. It calculates the effect of hypothetical price values on the margin, on the adjustments under the clauses and on the cash flows of the hedges. With strict rules: the values are chosen by the person, and the system does not propose “likely” ones; the scenarios are symmetrical, up and down, with no probabilities; the result is “with this value the margin would be this”, never “it is worth doing”; every question stays in the action log.
- It answers questions about the data, with source and date: the September LME copper average in euros and how much it weighs on the October invoices, from data obtained under licence and calculations done in code.
And six things it does not do: by choice, by licence agreement and, where the rules so provide, by law. It does not decide whether, when and how much to hedge. It does not forecast prices or suggest directions: it shows what has happened and how things stand today. It does not give personalised recommendations on transactions in financial instruments: in Italy this is “investment advice” (consulenza in materia di investimenti), a service that the law reserves for banks, investment firms and advisers entered in the registers provided for by the Testo unico della finanza, Italy’s Consolidated Law on Finance. It does not send orders or instructions to a bank or broker without a person (human in the loop). It does not make up numbers: every figure has a source and a date. It does not redistribute LME data outside the licence.
The data you need
From the ERP: orders and confirmations, contracts with their clauses, deliveries, stocks by metal, invoices, existing hedges with their maturities. From the market, under licence: the Official Cash Settlement and its averages, spot and forward exchange rates, the LME calendar with the prompt dates, premiums. The LME allows its data to be used beyond limited internal use only under a licence agreement, and keeps an official list of authorised distributors: FT Mercati, that is, FT Support srl, is on that list, and also publishes euro-dollar forward exchange rates for this purpose. The record-keeping rule applies to everything: every number with its source and date next to it, so that a check a year later can redo the calculation.
Rules and accounting, in brief
- EMIR, the European regulation on over-the-counter (OTC) derivatives. An industrial company that enters into a derivative with a bank is a non-financial counterparty. It may calculate its positions every twelve months: if it stays below the clearing thresholds it has no clearing obligation; if it exceeds them, or if it does not do the calculation, it must notify ESMA and its national competent authority and becomes subject to the obligation (Article 10); contracts that objectively reduce the risks of the commercial activity, such as the hedging of the metal that the company processes, buys or sells, are not counted. What remains is timely confirmation, the reconciliation of contracts and data quality: for derivatives between a bank and a company below the thresholds, reporting to the trade repository falls to the bank, but the company answers for the accuracy of the data it provides, LEI code included. In Italy the authority for notifications on the thresholds is Consob, the financial markets regulator.
- OIC 32, Italy’s accounting standard on derivatives, for companies that prepare their financial statements under the Italian national standards. Hedge accounting is an exception: it requires, at the inception of the hedging relationship, a formal designation and documentation of the instrument, the hedged item, the nature of the risk and the method by which effectiveness will be assessed, as required by the Italian Civil Code (Article 2426, number 11-bis) and by OIC 32 (paragraph 71). Future purchases of metal can be designated as “highly probable forecast transactions” (the accounting term for planned transactions), if the probability is documented, for example by the order book (paragraphs 61-63); the hedging of stocks is a fair value hedge. When the derivative has characteristics that are the same as, or closely aligned with, those of the hedged item and is entered into on market terms, the company can treat the relationship as “simple” and assess its effectiveness by comparing the critical terms: nominal amount, settlement dates, maturity, underlying (paragraphs 101-103), a comparison of data that software can carry out and document at each closing. On 1 April 2026 the OIC, Italy’s accounting standard setter, published draft amendments on the presentation in the financial statements of commodity derivatives not designated as hedges; the consultation closed on 31 May 2026 and the final version has not yet been issued: the text in force remains that of 2022.
- IFRS 9, for companies that use the international standards, with its chapter on hedge accounting.
- Tax, in Italy: the instrument is treated as a hedge on the basis of the correct application of the accounting standards (Article 112 of the TUIR, Italy’s income tax code): the financial statements lead, and the classification is decided with the accountant.
- MiFID II: when a bank offers a derivative, an SME that is not a large undertaking under the criteria of Annex II is normally a retail client, with the protections that go with it.
All of this is done with the accountant, the auditor and the bank. The guide is there to tell you which data and which documents to prepare beforehand.
How to start, and what it takes
- The inventory of exposures from the contracts and the ERP: one metal, one quarter, all the flows.
- The written rules: time horizons, hedge ratios, who checks what; sales, purchasing and administration in the same room. The draft amendment to OIC 32 says so too, in its own way: the use of derivatives to hedge price risk “must emerge from operational reality and not from a mere declaration or from formal documentation”.
- A pilot: one metal, one month in parallel with the current method, the numbers compared at the end.
- The measurement: how many exposures were found that could not be seen before, how many checks stopped a wrong invoice or settlement, how much time it took to prepare the year-end documents.
Three conditions, before anything else. The LME points out that, if the exposure is very small, the time and resources needed can outweigh the benefit: that is why measuring the exposure comes before everything else. If back-to-back physical hedging already covers everything, net exposure is zero and there is nothing to hedge: that is a fact, not a choice. And the LME asks that time horizons, hedge ratios and oversight be in place first: margins, confirmations and documents need someone to follow them.
How we work
Consulting and market support on hedging, with data analysis and training, belong to FT Mercati, which offers them to companies that buy or sell metals; the whether, the when and the how much remain a decision for the company, taken with its own intermediary. FT Support stops before that, at the process and the software: the inventory of exposures read from the contracts, the calculation of net exposure from the ERP, the checks, the alerts, the draft documents, with LME data obtained under licence. There is no ready-made “hedging” module: it is custom-built with the same building blocks as the CRM with AI agents we use every day (document reading, calculations in code, confirmations, action log), within the data and integrations service. The path is that of the method: a scope, a pilot, a measurement.
Sources
- London Metal Exchange, Hedging (Physical market benefits)
- London Metal Exchange, LME Digest: Physical and financial hedging, beginners guide
- London Metal Exchange, Prompt date structure
- London Metal Exchange, Contract types (lots, dollars, futures, options, Monthly Average Futures)
- London Metal Exchange, Find a member (access through Category 1, 2 and 4 members)
- London Metal Exchange, Market data licensing
- London Metal Exchange, Licensed distributors (official list, including FT Support srl)
- Borsa Italiana, financial glossary: Hedging (in Italian)
- Regulation (EU) No 648/2012 (EMIR), consolidated version of 24 December 2024, Articles 2, 4, 9, 10 and 11 (EUR-Lex)
- Delegated Regulation (EU) No 149/2013, Article 10: contracts that objectively reduce commercial risks (EUR-Lex)
- Consob, EMIR: categories of counterparties and obligations (in Italian)
- European Commission, Derivatives / EMIR
- ESMA, EMIR Reporting (standards applicable since 29 April 2024, LEI code)
- Fondazione OIC (Italy's accounting standard setter), OIC 32 Strumenti finanziari derivati, on derivative financial instruments (2022 document, simple hedging relationships, draft amendments of 1 April 2026; in Italian)
- FiscoOggi (Italy's revenue agency, Agenzia delle Entrate), Derivative financial instruments: a review of the tax treatment, 1 March 2024 (in Italian)
- IFRS Foundation, IFRS 9 Financial Instruments
- Directive 2014/65/EU (MiFID II), consolidated version, Annex II: professional clients (EUR-Lex)
- Italy's Legislative Decree No. 58 of 24 February 1998 (Testo unico della finanza, the Consolidated Law on Finance), Article 1, paragraph 5-septies, and Articles 18, 18-bis and 18-ter, on Normattiva (in Italian)
- Eurostat, Enterprise statistics by size class and NACE Rev. 2 activity (sbs_sc_ovw), Italy, divisions C24 and C25, 2024 data, update of 30 September 2026; totals and share of the two divisions added up by us
- FT Mercati, Euro-dollar exchange rate and metal prices: which rate to use (2 September 2026)
Checked on 17 November 2026. Rules and deadlines change: always check the official source before you decide.